Workshop Smart Campus 26 juin 2019 - IRIT Toulouse

Au cours de cette journée, nous avons partagé les projets de smart campus qui sont soutenus par les universités de La Rochelle, de Bordeaux, de Paris Est et de Toulouse. Nous avons pu découvrir les différents axes de développement choisis par les établissements ainsi que les problématiques rencontrées mais aussi les partenaires (industriels ou non) investis.

Les participants étaient :

Marwane REZZOUKI - Université de Bordeaux

Francis ALLARD - Université de La Rochelle

Patrice JOUBERT - Université de La Rochelle

Pauline BLONDE - Université de Paris-Est

Mathieu DELORME - Université de Paris-Est

Nafissa BOUTKHIL - Université de Paris-Est

Marie-Pierre GLEIZES - Université de Toulouse III



Design and management of a Low Voltage DC Micro-Grid with Renewable Energy Sources and Energy Storage Systems

Context Presentation

With the environmental issues and the new ecological considerations, one of the challenge is the creation of sustainable electric grid to supply the demand. With this context, we observe the deployment of decentralized Low Voltage DC Micro-Grid (LVDC-MG) in building, with high penetration of Renewable Energy Sources (RES) and Energy Storage Systems (ESS). The aim of this PhD thesis is to contribute in this field by designing an LVDC MG in the ADREAM Building integrated PV (BiPV), at LAAS-CNRS, TOULOUSE. The main difficulties is to combined the ESS behavior and aging studies with a global system approach in order to proposed a sizing method and an energy management strategy optimized and simple to implemented for electrical research community.


Figure 1: electrical synoptic of the LVDC MG study

Scientific Goals

- Study the impacts of BiPV and DC building loads power profiles on ESS behavior and lifecycle

- Proposed a methodology, with a systemic approach, to size the PV and the ESS

- Compared multiple sizing and energy management strategy in order to design the optimal LVDC MG to supply the ADREAM BiPV lightning network

- Compared the performances of Lead acid batteries and Lithium-ions batteries in our case study


Energy Storage System, Low Voltage DC Micro Grid, Building integrated PV, Lead-acid batteries, ageing mechanisms


PhD student: / Supervisors: &

Unfired earth stabilization with mineral or organic binders for sustainable and durable construction materials

Context Presentation

To mitigate the global worming related to the human activities’ greenhouse gas emissions, the so far industrial model has to be profoundly rethought. In the construction sector, ecofriendly constructions materials are gaining increasing interest as alternative to cement concrete. Unfired earth material is thus promoted thanks to its accessibility, its social, economic, and hygrothermal benefits. In the project neOCampus, our work is conducted at the Laboratory of Materials and Durability of Constructions (LMDC). The main goal is to develop unfired earth-based materials for use in potential reconstructions in the Université Paul Sabatier’s campus. Two main challenges are addressed: achieve sufficient mechanical strengths and mitigate risks related to potential water damages. To that purpose, soils from Toulouse area are stabilized with mineral binders (cement and hydrated lime) on the one hand and with organic binders (biopolymers from plants’ and animals’ byproducts) on the other hand. Unlike the modern industrial practices, a few amount of the mineral binders are used to limit their CO2 footprint. Various organic products are tested to identify the promising candidates for earth stabilization.


Figure 1: Specimens for the performances (mechanical and hygrothermal) tests

Scientific Goals

- Achieve sufficient mechanical strengths and water resistance,

- Use environmentally friendly stabilization with organic binders and mineral binders,


Construction materials, unfired earth, water resistance, mechanical strengths, ecofriendly stabilization.



Information modelling for the development of sustainable construction (MINDOC)

Context Presentation

In previous decades, environmental impact control through lifecycle analysis has become a hot topic in various fields. In some countries, such as France, the key figures for energy show that the building sector alone consumes around 45% of the energy produced each year. From this last observation emerged the idea to improve the methods hitherto employed in this field, in particular those related to the exchange of information between the various stakeholders involved throughout the lifecycle of a building. Information is particularly crucial for conducting various studies around the building; for instance, the assessment of the environmental impact of the latter. Concerning information exchange issues, the creation of open standards such as Industry Foundation Classes (IFC) or CityGML, but also semantic web technologies have been widely used to try to overcome it with some success elsewhere. Another striking issue is the heterogeneity between construction product databases. What would be particularly interesting is to know the environmental impact of a building at early phases of its lifecycle. However, there are a number of problems that still do not have solutions. This includes associating Building Information Modelling (BIM) and semantic web technologies with environmental databases to increase the flexibility needed to assess the building's environmental impact throughout its lifecycle.


Figure 1: MINDOC methodology process

Scientific Goals

- Study how information exchange is made within experts during a building lifecycle in order to figure out interoperability gaps ;

- Fill some of the encountered gaps by mean of formalization of building information.

- Combined with the formalization of environmental data on construction products, the latter will enable the introduction of product data at an early stages of the building lifecycle.


Knowledge Modeling & Semantic Reasoning - Merging Ontologies - Decision Support - Building Information Modeling (BIM) - Environmental Databases.


SANDMAN: a Multi-Agent System for Anomaly Detection in Smart Buildings

Context Presentation

The number of sensors in buildings is constantly increasing, thanks to more accessible costs and the obvious interest of their use for optimized management. In this thesis we are interested in the use of data from these sensors to detect anomalies in buildings. These data, which are very numerous, can be of unknown and heterogeneous types.An anomaly is defined as unexpected and undesirable behaviour in a system and may depend on the context. In order to be able to deploy an anomaly detection system as widely as possible, it is necessary to create a decision support tool for energy experts. To address these issues, a system based on cooperative multi-agent systems implementing AMAS theory is being developed that allows anomalies to be detected by supervised learning. The anomaly detection system must take advantage of the feedback from one or more experts who label certain instances as anomalies or non-anomalies. These feedback are used for learning. The system we develop allows the addition or removal of new sensors without interrupting the detection of anomalies.



The system classifies situations


Scientific Goals

- Improve energy efficiency

- Detect anomalies in real time

- Learn continuously from the expert feedback


Multi-Agent Systems, Smart Buildings, Internet of Things, Supervised Learning, Anomaly Detection




Embedded Multi Gas Sensors for Monitoring Indoor Air Quality

Context Presentation

The measurement of indoor air quality is important for health protection against chemical and gaseous pollutants ... The indoor air can contain many pollutants such as CO, CO2, NO2 and VOCs. These pollutants exist in differents materials and products that can be used in housing (furniture, cleaners ...), but can be also comming from human activities or outside source. In this case, the detection, measurement and monitoring of these gazeuse contaminants is necessary.In view of its high performance and low cost, the innovative gas multi-sensor based on metal oxides semiconductors for analyzing and controlling indoor air quality is a good alternative to electrochemical and infrared sensors. This project is currently in progress in LAAS in collaboration with the LCC and Laplace and as part of a thesis funded by neOCampus and the Occitanie region. This thesis focuses on the characterization of multiple MOX-based gas sensors and integrates these multi-sensors in electronic card to achieve a connected object to control the indoor air quality in offices and classrooms in University Paul Sabatier in Toulouse



  Figure 1 : « MOX gas Multi-sensors»



Scientific Goals

The gas multi-sensor is a microsystem composed by four sensors on a microchip, realized to detect target gases. The scientific objective of this thesis is to characterize new nanomaterials (SnO2, CuO, ZnO, WO3 ...) designed by the LCC by using an exprimental set-up and to define an operating protocol by trying differents operationg modes.


Multi-sensors,  MOS, Indoor Air Quality, Smart building, neOCampus



Hybrid IoT: a Multi-Agent System for Persistent Data Accessibility in Smart Cities

Présentation du contexte

La réalité d'un campus intelligent ou plus généralement d'une ville intelligente passe par une observation régulière de l'environnement par des capteurs ad-hoc, afin d’agir dans l’environnement avec des dispositifs automatiques pour améliorer le bien-être des usagers. Ces capteurs permettent d’obtenir une connaissance des activités humaines et des conditions dans lesquelles ces activités sont menées, mais le déploiement d'un grand nombre de capteurs peut être coûteux. Les coûts sont principalement liés à l'installation, la maintenance et les infrastructures de capteurs dans les bâtiments existants. Pour ces raisons, l’objectif de cette thèse vise à réduire ces coûts en utilisant quotidiennement des milliers d’informations partielles et intermittentes provenant de smartphones des usagers du campus de l’Université Toulouse III Paul Sabatier. Ces traitements sont fondés sur une technologie d’Intelligence Artificielle par systèmes multi-agents coopératifs.



Figure 1 : «On utilise les informations des dispositifs intermittents et mobiles pour fournir des estimations précises»

Objectifs scientifiques

- Apprendre à partir de données brutes, imprécises et intermittentes sans feedback.

- Fournir les informations en continu, même en l’absence de données de smartphone des usagers.

- Utiliser une approche hybride de l’Internet des objets qui mixe capteurs réels et capteurs virtuels.

Mots clés

Systèmes multi-agents auto-adaptatifs, fusion de données, apprentissage, smart campus


Davide Andrea Guastella, Valérie Camps, Marie-Pierre Gleizes, {davide.guastella, camps, gleizes}

QuaLAS - eco-friendly Quality of Life in Ambient Sociotechnical systems

Context Presentation

The usual approach to ambient intelligence is an expert modeling of the devices present in the environment, describing what each does and what effect it will have. When seen as a dynamic and noisy complex systems, with the efficiency of devices changing and new devices appearing, this seems unrealistic. We propose a generic multi-agent (MAS) learning approach that can be deployed in any ambient environment and collectively self-models it. We illustrate the concept on the estimation of power consumption. The agents representing the devices adjust their estimations iteratively and in real time so as to result in a continuous collective problem solving. This approach will be extended to estimate the impact of each device on each comfort (noise, light, smell, heat...), making it possible for them to adjust their behaviour to satisfy the users in an integrative and systemic vision of an intelligent house we call QuaLAS: eco-friendly Quality of Life in Ambient Sociotechnical systems.





Figure 1: « eco-friendly Quality of Life in Ambient Sociotechnical systems »


Scientific Goals

- multi-learning in a highly dynamic environment,

- conditions for scaling up,

- sensitivity to disturbances and noisy signals

- convergence speed


neOCampus, file, presentation, innovation, ambient Intelligence multi-agent systems, complex systems, collective learning.

Contacts -


Journée IT DAYS - 13 juin 2019 - Labège

Participation à la table ronde


Expérimentations de véhicules en cours ou à venir en Occitanie.

Les participants sont :   

  • Benoit Perrin, EasyMile   
  • Marie-Pierre Gleizes, IRIT Université Toulouse III Paul Sabatier
  • Ingrid Larrieu Ad'OCC  
  • Bertrand Serp Toulouse Métropole




Table Ronde du Domaine d'Activité Stratégique Smart City - 13 juin 2019 - IRIT -

"Comment et pourquoi articuler Smart-Building Alliance, entreprises et universitaires

autour de la recherche dans le Smart Building?"

9h30-12h IRIT  (suivi d'un buffet)

Participation libre - Inscription obligatoire


Back to Top